Cessna Service Bulletin SB06-53-01

Revision 1, Fuselage Stringer Rivet Inspection

Reason for Revision:  To add instructions for airplanes in compliance with the original issue of the SB and upon inspection needed a rivet to be installed on the left fuselage and/or the right fuselage behind the rear doorpost as described in SB06-53-01. 

Required Action:  Please replace any copy of SB06-53-01 with the attached copy of SB06-53-01 Revision 1 which is printed in its entirety.  Compliance with Revision 1 of this Service Bulletin is required for airplanes in compliance with the original issue of this SB, if an additional rivet was required to be installed on the left fuselage and/or the right fuselage behind the rear doorpost as described in SB06-53-01.

NOTE:  Service Bulletins considered mandatory, by the CAP Service Bulletin Committee, and Service Bulletins marked mandatory by the manufacturer, with a credit date, will be posted on this page and distributed to the appropriate Wings.